High Pressure Carbon Steel Gate Valve

High Pressure Carbon Steel Gate Valve is suitable for various working conditions of steam water medium pipeline and petroleum, chemical and metallurgical medium pipeline, used for media closure and isolation.High Pressure Carbon Steel Gate Valve is reliable, closed tightly and the pressure is reduced. The design covers a wide range of requirements to meet any customer needs from general to harsh service conditions.
High Pressure Carbon Steel Gate Valve meets the requirements of the latest edition of API600 and ASME B16.34.The connection methods include welding and flange connection

Size: NPS 2 "~ 66" (DN50 ~ dn1650)

Pressure rating: ASME class150 ~ 2500 (PN16 ~ pn420)

Body material: Body matenal WCB,WC6,WC9,ZG20CrMoV

End connection: RF, BW, RTJ

Operation: manual, pneumatic, electric, hydraulic.

Suitable Temperature: -196ºC~450ºC( Different temperature choose different materials).

Suitable Medium: Water, Steam, Oil and natural gas etc.

Design and manufacture：NB/ T47044,NB/ T47044

Note：

1,The valve beyond the above specifications can be customized according to user requirements;

2,The applicable temperature range of each valve shall be subject to the actual pressure bearing material of the valve.

High Temperature And High Pressure Power Station Gate Valve
1.Type: Z60Y,Z960Y,Z62H,Z962Y
2.Size: DN15~300mm
3.Pressure: 1.6～32MPa
4.Material: Cast steel, Stainless steel, Etc.

Gate valve, the opening and closing member is a gate, the direction of movement of the gate is perpendicular to the direction of the fluid, gate valve can only be fully open and fully closed, can not be used for regulation and throttling.

①Divided by gate structure: wedge type and parallel type.

Wedge gates are available in 3 configurations: single gates, double gates and flexible gates.

②Divided by type of structure: flat gate valve and knife gate valve.

① Low flow resistance.

② Less effort to open and close.

③ Water hammer is less likely to occur.

④ The medium can flow to both sides of any direction, easy to install.

⑤ Simple structure, good manufacturing process, wide range of application

As the name suggests, High Pressure Carbon Steel Gate Valve is a valve product suitable for use under higher temperature and higher air pressure. In fact, it does not refer to a single valve. It can further include a variety of styles and classifications. Friends who are interested or want to purchase but do not have basic knowledge for the time being may refer to the following, Let's analyze and learn about the knowledge of High Pressure Carbon Steel Gate Valve, including material introduction and a series of purchase suggestions. Interested friends may gain satisfactory results. Further, we can also refer to the actual situation to comprehensively determine a suitable High Pressure Carbon Steel Gate Valve
1. Material of high temperature and high pressure valve
2. Materials with high hardness
3. Materials with acid resistant protective film
4. Materials with high yield point and good stability
5. Materials with high fatigue strength.

Hot Tags: high pressure carbon steel gate valve, China high pressure carbon steel gate valve manufacturers, suppliers, factory, Bidirectional Knife Gate Valve, Pressure Seal Flexible Wedge Gate Valve, API High Pressure Gate Valve, gate valve, Explosion Proof Electric Gate Valve, Slag Discharge Gate Valve