Products
Buried Ball Valves
video
Buried Ball Valves

Buried Ball Valves

Buried Ball Valves must avoid external leakage and eliminate any impact on its operation or sealing performance from ground subsidence and vibration from earthquake or above ground traffic. The steel valve body has an integrated welded structure made of materially stable carbon steel pipes for pressure service or molded from a rolled steel for welded structure, having high stiffness and reliability equivalent to or higher than that of the steel pipes to be connected.
Buried Ball Valves for underground installation service are provided in fully welded body execution with butt welding ends. For this application, buried ball valves are provided with an extended stem; drain, vent and emergency sealant lines are fitted at the top of the extension. Buried Ball Valves are fully welded body ball valve with extended stem for underground installation. The length of extended stem is as per customer specification to suit their project request.

Buried Ball Valves, no external leakage. The process of the ball has advanced computer detector tracking and detection, so the machining precision of the ball is high. Direct buried ball valves can be buried directly underground without building a large valve well. Only small shallow Wells can be set on the ground, which can save construction cost and engineering time greatly. Adjust body length and stem height according to pipeline construction and design requirements.
The structure of the buried ball valves are better crafted, easy to install the stem part, especially suitable for large diameter fully welded ball valves.
Two bodies are suitable for small bore fully welded ball valves, three bodies are suitable for large bore fully welded ball valves.

 

Product model: Q367F

Implementation criteria: API 6D/GGB -T 12237

Optional size: 2 "-42" (dn50-dn1200)

Optional pressure: 150LB-2500LB (pn16-pn420)

Material: Carbon steel, ST37.0, A106-B

End Connection: Flange, weld

Working temperature: -29℃~+200℃

Valve body: carbon steel ST37.0,A106-B; 20#steel

Sphere: stainless steel 304 or 316

Stem: 2Cr13

Stem seal: perfluorinated rubber

Ball seal: RTFE (PTFE+C)

Connection method: flange, welding

Operation mode: handle, pneumatic, electric, worm gear

2 3

2 7

 

21 1

1732086444778

 

Products Features

 

 

1. The Buried Ball Valves are integral type welded ball valves,there will be no leakage at all.
2. The seat is made of carbonize teflon (C-PTFE) which has a strong adapt for the change of the pressure and temperature,there will be no leakage within the state pressure and temperature.
3. The manufacture of the ball tracked and checked by advanced The computer monitor, so the balls have been precisely machined
4. The material of the valve as same as the pipe,there will be no uneven stress,also will not be deformed due to the earthquake and pass by cars.
5. Directly buried welded ball valve can be buried under the ground directly and not need to high large valve shaft,just need Small shallow Wells ,this save a lots of cost and process time.
 

 

Products Benefit

 


• The high machining precision of the ball,easy to operate.
• Compared with other valve of the same specifications,full welded ball valve has a small body.
• It has many kinds of specifications, can also be designed according to customer requirements,Full welded ball valves,full weld flanged ball valves, Directly buried ball valves,air vented directly buried ball valve


 

Products Applications

 

Buried ball valves for buried conditions of the valve, set the valve extension pole, maintenance with extension pipe (both sides of the channel exhaust pipe + both sides of the valve seat grease tube + valve body bottom drainage pipe) and control valve, so that the valve operating position to the ground in a convenient location for operation.

Buried ball valves surface corrosion-resistant asphalt coating protection or epoxy resin protection, on-site pipeline cross-connection and resistance protection measures to adapt to the underground use environment.

• The city gas, the gas output pipeline, trunk and feeder supply, etc.;
• The central heating: large output line heating equipment, trunk and branch;
• Heat exchanges, piping and open/close of each circuit;
•The steel mills: all kinds of fluid pipes, exhaust pipe, gas and heat supply, fuel supply line;
• All kinds of industrial equipment: all kinds of heat pipe, all kinds of industrial gas and heat pipe;
 

Hot Tags: buried ball valves, China buried ball valves manufacturers, suppliers, factory, Top Entry Trunnion Mounted Ball Valve, High Quality Mini Ball Valve, Cryogenic Ball Valve, Pneumatic Operated Ball Valve, Oxygen Ball Valve, V port Ball Valve

Send Inquiry