The maintenance of stop valves mainly includes the following aspects:
Regular inspection and cleaning and maintenance: Regularly check the appearance of the valve, including the valve body and valve cover, to ensure that there is no obvious damage, cracks or corrosion. Clean the internal and external surfaces of the valve, remove impurities such as dust and grease, and avoid using corrosive cleaning agents.
Check the sealing performance: Ensure that there is no wear, scratches or leakage on the sealing surface. If a poor seal is found, the sealing gasket can be replaced or the valve can be adjusted to ensure the sealing performance of the valve.
Check the operating performance: Check the operating performance of the valve, including whether the switch is flexible, whether the indicator mark is normal, and whether the manual operating device is unobstructed. Add lubricating oil or make necessary adjustments if necessary.
Check the pipeline connection: Ensure that there is no looseness or leakage at the pipeline connection of the valve. If there is a problem with the connection, tighten or replace the seal in time.
Check the working pressure and temperature range: Ensure that the working pressure and temperature range of the valve are within the design range. If it exceeds the range, take measures to adjust or replace it in time.
Prevent valve leakage and jamming: Regularly replace valve seals and use materials suitable for the characteristics of the medium. Keep the moving parts of the valve clean and lubricated, and operate the valve regularly to prevent rust. If leakage or jamming is found, it should be handled in time.
Maintenance in special environments: For valves used under extreme temperature or pressure conditions, the maintenance cycle should be shortened and inspections should be strengthened. For example, valves used under high temperature conditions need to pay attention to "hot tightening" operations to prevent leakage caused by thermal expansion of the bolts.
Record and maintenance management: Regularly record the maintenance and use of the valve for subsequent maintenance and management.

