Bolted bonnet Forged steel Globe Valve is used to provide isolation in pipelines and at the beginning and end of trapping stations. Economical yet reliable, this valve has a multitude of uses including throttling and semi accurate control of process fluids in high temperature and high-pressure applications.
The valve designed to API602 and tested to API598 has an outside screw and yolk with rising stem. The handwheel operates the globe valve for both isolation and for throttling applications.
Material: A105, LCB, LCC, CF8, CF8M, CF3, CF3M F22.
Size：1/2″-2″
Pressure:150lb-2500lb
Basic Design: API 602, ANSI B16.34
Test & Inspection: API 598
Operator: Hand wheel, Gear, Electric actuator
Design Features:
1.Forged Steel,Outside Screw and Yoke,Rising Stem,
2.Non-Rising Handwheel,Integral Backseat,
3.Reduced Bore or Full Port,
4.Socket Welded,Threaded,Butt Welded,Flanged End
5.SW, NPT, RF or BW
6.Bolted Bonnet,Welded Bonnet and Pressure Sealed Bonnet.
7.Solid Wedge,Renewable Seat Rings,Sprial Wound Gasket,
Why use globe valves: these Forged steel Globe Valves provide a positive tight shut off in the horizontal or vertical position for process fluids in pipelines. They also offer a small amount of control and are used to throttle steam, gas or liquids. Easy to operate and the preferred choice over ball valves by engineers to isolate trapping stations.
Typical applications include: Trapping lines and stations, Isolation, Condensate Lines, Before expensive plant equipment and Oil burner lines.
Hot Tags: forged steel globe valve, China forged steel globe valve manufacturers, suppliers, factory, Forged Steel Globe Valve, Oxygen Globe Valve, globe valve, Iris Diaphragm Valve, Cryogenic Globe Valve, Power Station Valve