Usually valves are kept in an open position when unused. To close them, an external force has to be provided which then blocks fluid flow. But for check valves, it's the opposite. These valves are normally closed. And then a force is applied which opens the valve. Other check valves can also work on the concept of differential pressure. A higher inlet pressure mixed with lower outlet pressure allows fluid flow.
Fluorine Lined Check Valve work exactly the same way. The only difference is a layer of PTFE/fluorine which is added to the valves. In turn, this gives the valve added corrosion resistance. And so Fluorine Lined Check Valve is also termed chemical process valves.
Size:DN15~DN400
Body material:WCB,CF8,CF8M,CF3,CF3M
Ball:PTFE
Lining material: PFA, PTFE, FEP, GXPO etc
Nominal pressure:PN10,PN16,150LB
Temperature Range:PFA:-29℃~200℃, PTFE: -29℃~180℃ ,FEP:-29℃~150℃ ,GXPO:-10°C~80℃
Connection method: Flange, Wafer
Applicable media: Strong corrosive media , hydrochloric acid, nitric acid, hydrofluoric acid, liquid chlorine, sulfuric acid etc


Fluorine Lined Check Valve for the control of corrosive or strongly corrosive media, the valve body cavity surface covered with PTFE plastic, with high strength, good corrosion resistance; applicable to different work temperature and fluid pipeline, to prevent all kinds of pipeline or equipment on the media backflow of the one-way opening and closing. Applicable to various concentrations of strong alkali organic solvents and other corrosive gases, liquids and media pipeline use.The Lifting-type check valve's structure is similar to the general disconnecting valve, its valve flap along the channel center for lifting movement, reliable action, generally can only be installed in the horizontal pipeline, lifting the common characteristics of vertical check valve valve valve flap along the valve access axis to do the lifting movement, generally should be installed in the vertical pipeline.
Fluorine Lined Check Valve have the following added benefits:
1,Added resistance to corrosion: Layers of PFA/PTFE are more impervious to chemicals. This is done by preventing chemical solutions from coming in contact with the valves' structural body.
2,Allows for extra durability: Fluorine lined check valve have greater pressure limits as the layer of PFA/PTFE disperses pressure.
Hot Tags: fluorine lined check valve, China fluorine lined check valve manufacturers, suppliers, factory, Cryogenic Swing Check Valve, Rubber Disc Swing Check Valve, 300X Slow Closing Check Valve, Vertical Check Valve, Forged Steel Check Valve, Rubber Duckbill Check Valves






