Products
Dual Plate Check Valve
video
Dual Plate Check Valve

Dual Plate Check Valve

Consisting of 2 discs attached to the valve body by a pin and operated by the action of springs, which immediately start closing the valve, when the fluid stops, dual plate check valves are used to prevent back flow and also work as a prevention for water hammer.
Dual Plate Check Valve is made from a wide range materials including cast iron, special stainless steels, ect. They can be soft seat or metal seat construction and also have the ability to adjust the spring torque according to the application, which makes it a product suitable for general and special purposes.

Since 2016 Jeri Valves has been manufacturing a variety of industrial valves with the highest quality standards. Chongqing Jeri offers API 594 Dual Plate Check Valve in ASME classes 150 to 600, made from cast carbon steel, stainless steel or alloy steel wafer, lug, or double flanged.
Dual Plate Check Valve have been the preferred choice for decades due to their proven reliability and low pressure drops. All check valves are tested to API 598 and must meet or exceed all applicable API, ANSI and ASTM Standards.
 

Energy-saving silencing check valve is suitable for water supply and drainage pipes.

This valve disc is guided by the central axis at both ends of the inlet and outlet.

It can be opened and closes flexibly. It can be installed horizontally and vertically.

The valve disc is loated by spring. Its fast closing can effectively eliminate water hammer, with good sealing performance and no noise during closing.

The utility model has the advantages of small volume, light weight, small fluid resistance, fatigue resistance, long service life, etc.

 

Type:Metal Check Valves

Model Number:Check valve

Application:General

Temperature of Media:Low Temperature

Power:Manual

Media:Water

Port Size:DN50-DN1200

Structure:Check

Design confirms:DIN3356

Flanges drilled confirms:DIN2501/EN1092-2 PN10/16/25

Tightness check:API 598/ISO 5208/EN12226-1

Face-to-face conform:DIN3202,F6/EN558-1 series 48

Suitable medium:water and neutral liquid

Working temperature:-20 to 120 centigrade. (EPDM: -20 to 120, NBR: -10 to 80)

Body: Cast iron/Ductile iron/WCB/Stainless Steel

Disc:EPDM/NBR

Stem:Zinc Plated Steel/ Stainless Steel/ 2Cr13 stainless steel etc.

Gland follower:Cast iron/Ductile iron

 

 

Application Specification:

 

 

1, Valve design and manufacture according to API 594 requirements

2, Valve structural length according to API 594 requirements

3, Valve inspection and acceptance by API 598 requirements

Swing Check Valves 1

Swing Check Valves 2

 

 

Products Key design features

 

 

Dual Plate Check Valve offer some impressive advantages over other types of check valves.
Retainerless body design with no external body penetrations eliminating the possibility of outside leakage. Disc assembly secured in place by high strength key.
End gasket surfaces are uninterrupted with no screws or lock pins breaking the gasket surface. No gasket restrictions required.
Seat faces lapped for smooth finish and superior sealing.
High torsion inconel springs for quick closing.
Each valve is shell and seat pressure tested per industry standard API 598.
Available in Wafer, Lug and Double Flange styles.
Each valve has a unique certification number that is traceable to the valve certification sheet which includes MTR data, pressure test report, and inspection report.
 

Hot Tags: dual plate check valve, China dual plate check valve manufacturers, suppliers, factory, Rubber Duckbill Check Valves, Forged Steel Check Valve, check valve, Butterfly Slow Closing Check Valve, Single Disc Check Valve, Wafer Swing Check Valve

Send Inquiry